A forced-air heating system is one that makes use of forced air as its primary heat transfer medium. These systems generally make use of ductwork, vented pipes, and plenum vents as means of airflow, independent from the actual central heating and cooling systems in the home. The system may not be powered by an electrical heater. As the name indicates, these types of heating systems are generally installed in buildings where conventional heat sources are unavailable or unaffordable. Additionally, they tend to be energy efficient because of their reliance on forced air.
Advantages of forced air heating
There are a few advantages to forced air heating. First, this type of home heating system operates at significantly lower temperatures than most standard heating appliances. This is important when winter is coming because in many parts of the country, temperatures drop below freezing for extended periods of time. In such circumstances, a forced air heating system can be used to keep a home warm, even in the depths of the night. In addition, the system can also be used to provide heating to an apartment or other space when electricity is unavailable.
Generally, a forced air heating unit has its ducts located in the attic, or some other part of the house. However, there are some models that are designed so that the ductwork is located in a part of the building that does not require much ventilation. These so-called “high efficiency” ducts are often more expensive but are more energy efficient than traditional ductwork.
Components of a forced air heating system
Typically, a forced air heating system consists of three components: the heating element, a fan, and the compressor. The heating element is the furnace or boiler, which heats ambushes air through ducts into the different rooms of the home. The fan is typically mounted in the roof of the home. When forced air heating systems are used, a thermostat regulates the amount of heat that is generated by the furnace. Once it has determined that the room is sufficiently cool, the fan shuts down and the air is replaced by fresh air from the outside.
This forced air heating system is a great option for households that do not want to use a conventional furnace or boiler. These units are efficient and cost-effective, even under the most extreme conditions. The different types of systems work on a similar principle, but there are some differences between them. This article briefly discusses some of the most common types of heating systems that do not involve electricity.
One of the most popular forced air heating systems is the compressed air heating system. In this case, ducts are used to circulate the warmed air throughout the house. Since compressed air can cool quite quickly, it is often used in cooling systems as a source of chilled air. The cooling effect is very effective for those who live in warm climates and tend to need cooling at times other than during the summer.
Chilled air method
Another type of forced air heating is the chilled air method. In this system, ducts are positioned in different areas of the home and connected to the ducts in the furnace. These ducts take the heated air and move it through a series of ducts, bringing it into the rooms where the air is needed. The cool air is circulated through fans to make it comfortable. Since the cooled air is not exposed to the furnace, there is a lot less likely of a buildup of carbon monoxide in the home.
The installation process of forced air heating is relatively simple. Since the system does not require electricity to function, there is no need for an elaborate setup. However, you will have to make sure that the proper ductwork is installed and that the correct gauge and size ducts are utilized in the home. Proper insulation is also important. With proper insulation, your forced air heating will work efficiently, but you can expect to pay a little more for the system because of its lower efficiency.