If you’re in the marketplace for a brand new house heating system, chances are that you’ve heard the expression forced air heating mentioned. Forced air heating is an extremely efficient heating method that makes use of cold air as a medium for heating. These systems utilize vents and ductwork for efficient air circulation throughout the house. A forced air heating unit can be highly controlled by a single thermostat and provides instant heat to the whole house by air-vent-forced heating via a circulating fan. With today’s technology, these units have become quite energy efficient and are more environmentally friendly than older versions of the same system.
Forced air heating system may be the best option for you
If your house is located in a warm climate where temperatures rise above 60 degrees during the summer months, you’ll find that forced air heating will work well for you. This is because a forced air heating unit operates at a lower temperature than the average home; therefore, the warm air that the furnace pulls into the room is much cooler than the surrounding air. As long as your furnace is set to the right temperature, you won’t have to worry about your house being too hot or too cold. In fact, you can actually save money in this manner because you’ll never have to use a heating unit in areas where the temperatures are too extreme.
While forced air heating may not be right for every homeowner, there are several options available to you if this is the case. There are also “smart” models on the market that allow you to program the unit for certain temperature settings. For instance, you could set the heater to be a constant room temperature if you were away from home for an extended period of time – perhaps overnight. Or, you could leave the thermostat on and leave the house. These devices are particularly convenient if you’re spending a lot of time away from home because you don’t want to deal with the problems associated with using a traditional heater. Even if you still want a device capable of heating the home in these conditions, Smart thermostats make it possible to set the temperature according to what you need and eliminate some of the complications that come with using a furnace.
Oil-fired and oil-less
There are two types of forced air heating systems – oil-fired and oil-less. Oil-fired systems use oil that is placed in a hopper beneath the furnace. As air is pulled into the hopper, it is compressed by the oil and burned to create heat. A properly installed oil-fired system should pull air that is at or just below its burning fuel temperatures at all times, thereby reducing combustion by half. To keep your home at a constant temperature, you will need to have an oil-free furnace instead. Oil-less forced air systems do not require oil to be pumped into the hopper.
Gas furnace forced air heating options come in both electric and gas models
If you are looking for a furnace with the ability to heat a large amount of space (as many homeowners are), you may want to consider a gas furnace. Gas furnaces tend to be larger, heavier and more expensive than electric furnaces, but they can be an excellent choice for heating a large room or office building. The main drawback with gas furnaces is that they cannot be used in areas that do not have gas service (this includes most rural areas).
Forced air heating systems work through the following process: air passes through a collection container, which holds pre-heated air. The container is connected to a thermostatically controlled circuit board. The circuit board monitors the temperatures of the various gases in the pre-heated air. When an air packet reaches the predetermined temperature, the gas in the packet is released, heating the air immediately. The duration of heat release varies greatly by different types of forced air heating systems. The size of the room also affects the amount of time the heat source will stay on.
Hydronic heating option
One type of forced air heating that is less common is the hydronic heating option. This heating option operates by using convection rather than radiant heating. The basic concept is that the heated water is circulated around the house in a pipe system. The heated water then circulates throughout the house via the pipes. There are two major benefits to this type of forced air heating; the first being that it requires little maintenance, and the second being that it produces very little noise.
If you are looking to install a forced air heating system in your new home, there are many contractors out there who specialize in this type of heating. The cost of installation can vary depending on a number of factors. Many contractors base their prices on square footage, the material the ductwork is made of, and even your overall home size and shape. Of course, the most important factor when choosing a contractor to complete your installation is to make sure you get a good one. Talk to people you know, read reviews, look at rankings, and visit contractor comparison sites to help you find the best service. Forced air heating systems can really help you get more from your home.
Leave a Reply