Forced air heating has been around ever since the 19th century. This heating method is very efficient at heating our homes. The best part is that it is also a much cleaner way to heat our homes. There are so many advantages to using forced air heating versus traditional heating systems. If you’re in the market for a new house heating system, odds are that you have heard the phrase “forced air heating.” If not, you will soon be.
Forced air heating components
First of all, forced air heating utilizes three basic components: the thermostat, a condenser, and a vapor compression unit. The thermostat controls the temperature of the air using a set signal voltage. The condenser removes heat from the air and then sends it to the compressor to be compressed and refrigerated.
As mentioned, this type of home heating systems uses three components. With forced air heating, there is no cavity that must be used to house the fan motor. Instead, the fan is located in a duct that circulates the cold air throughout the house. A special tuning mechanism allows the pilot to adjust the speed of the fan to achieve the right room temperature. This is a much more economical way to cool a home than using cavity cooling fans.
Another advantage to forced air heating is that the entire process is very clean and doesn’t require any electricity. All three components are powered by electric energy. There are no ducts to clean or maintain. Also, the entire process can be shut down at any time to conserve energy. Most units use only one electrical circuit, which cuts down on the amount of electrical energy used. This type of system also allows for temperature control.
Forced air heating systems aren’t the only energy efficient options, however. Heat pumps are another option that is available to homeowners. Like forced air heating systems, the heat pumps are located inside the ductwork. The only difference is that heat pumps pull warm air into a storage tank rather than pushing hot air through the ducts.
While both types of forced air heating have their pros and cons, the cons of radiant heating far outweigh the pros. First, this type of heating method is completely passive. This means that the homeowner does not need to run any pipes or ducts. In addition, the entire process is very quiet. No fans or blowers are required to push the warmed air through the house.
On the other hand, heat pumps require open ductwork. This is because the water that is used to operate the heat pump is heated by the furnace. The homeowner then must open the ductwork in order to place the heated water through the system. Additionally, the majority of heat pumps require an electrical connection. However, many new models are now designed to use solar power, which eliminates the need for an electric hook up. This makes forced air heating much more environmentally friendly.
When deciding whether forced air heating is right for your home, there are several factors that you should consider. First, check with your local building officials to find out the regulations and guidelines for your area. Second, consider whether it would be more cost effective to go with a central, vertical or horizontal heat exchanger. Last, but not least, think about how much energy you would be using and if it would be more cost effective to go with a forced-air unit or a furnace-based system.
Pros and cons of the forced air heating system
There are some cons and pros of forced air heating systems. One of the best pros is the money savings involved. Because they do not use fuel, the central unit takes less of a hit to the pocketbook. Also, because they do not require duct work, you will have additional room in your home. However, there are a few cons as well.
The primary pro is the money savings. In most cases, the unit will pay for itself quickly, especially if you install a model with a high BTU rating. The central unit can also be a more efficient way to heat your home, as it does not require any cooling during the summer or storage during the winter. However, if you live in an area with extreme weather conditions, you may be better off with a furnace-based home heating system.
The second most popular pro is the overall effect it has on your home’s energy consumption. Furnaces take up a lot of energy to run, so they take up a lot of energy in the form of operating costs. A forced-air heating system requires almost no energy, which means it will save you money over time. If you install the right model, you can expect to see up to an eight percent reduction in your annual cooling and heating costs.